HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Hp 1920-g24 quality of service for voice

 
SOLVED
Go to solution
PiotrIr
Occasional Contributor

Hp 1920-g24 quality of service for voice

I'm trying to prioritize traffic for voip on Hp 1920-g24 using DSCP 46 and WRR queue. Is it enough if I enable trust for DSCP on port or do I need to do anything else? Could you advise please?

1 REPLY
Vince-Whirlwind
Honored Contributor
Solution

Re: Hp 1920-g24 quality of service for voice

You also need to make sure the frames/packets are marked - either the end device is marking them (which is why you have configured "trust", presumably), or you need to create a policy to apply markings on the switch.