HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Link Aggregation Problem: "The port is not configured properly" on HP V1910-48G Switch

 
cdeibert
Occasional Advisor

Link Aggregation Problem: "The port is not configured properly" on HP V1910-48G Switch

Hello There,

 

the subject says it all: After a power failure the Link Aggregation of my HP V1910-48G Switch fails on two ports. When I remove the aggregation I can access both of the linked ports. If I enable them it's not working anymore. I updated to latest fw. Somehow I doubt there's a connection with the power failure, maybe more a formerly unsaved configuration ? In the Member port details I see:

GigabitEthernet1/0/46     Unselected     The port is not configured properly
GigabitEthernet1/0/48     Unselected     The port is not configured properly

 

What do I miss ? Help kindly appreciated.

 

Regards

Carsten

 

 

 

P.S. this thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp Forum Moderator

1 REPLY
cdeibert
Occasional Advisor

Re: Link Aggregation Problem: "The port is not configured properly" on HP V1910-48G Switch

Just figured out that "The port is not configured properly" simply means "plug-in an ethernet cable". Actually it now seams that somehow these two ports are working when they are not in aggregation mode, but not when they are linked. Other links aggregations do work, as I figured out.