Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

MAC Authentication missing in HPE V1910-48G with latest firmware, even though it's a feature

 
user5000
Occasional Contributor

MAC Authentication missing in HPE V1910-48G with latest firmware, even though it's a feature

We have an HPE V1910-48G (JE009A) with the most current firmware to date, 1519P01.

The problem is that the MAC Authentication tab is missing in the GUI under Authentication. When I look in the release notes for the firmware and the user guide for the switch, they mention MAC Authentication extensively. See here:

http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=a00016042en_us

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03941555-3.pdf

We also have an HPE 1920-24G (JG924A). It's also a 3COM based switch with an identical looking GUI and command line interface. On it, under the Authentication tab, there is a button for MAC Authentication.

 

Why would the 1910 be missing MAC Authentication? We were under the impression, based off the manual and release notes, that we could configure MAC Authentication to a RADIUS server on the 1910, just like we do on the 1920.

 

Any help on this would be appreciated.

1 REPLY
falba
Occasional Visitor

Re: MAC Authentication missing in HPE V1910-48G with latest firmware, even though it's a feature

Hi, Did you find a way to authenticate the user in HPE 1910 witch mac authentication with radius ?

 

This options is missig for me too. In cli is possible, but the critical vlan and other importants options is missing.

 

Thank you.