Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Need Help Please - Problem creating a Link Aggregation between HPv1910 and HP2910-al

PeterDa
Frequent Visitor

Need Help Please - Problem creating a Link Aggregation between HPv1910 and HP2910-al

Hi All,

 

I am trying to create a Link  LACP between two switches.

 

I have made an attempt at setting up a link aggregation between 2 switcheswith no luck :         HP 2910-al Switch (Port 39-40)    < ========== > HP 1910-16G  Switch (Port 15-16) .

I have my Workstation connected into the HP1910-16G. There is an uplink from the HP1910-16 to the HP2910-al which works fine.   When I remove the uplink and connect the 2 switches using these aggregated ports I lose connection.

 

We tried to connect the LACP HP2910-al to a cisco switch and this worked.

 


Here is the configurations I made to the 2 switches :


HP 1910-16G SWITCH Configuration :

Here is the HP1910-16G Switch Vlans :

1
 VLAN 0001
 GE1/0/1-GE1/0/14, GE1/0/17-GE1/0/20
 
2
 trk2
 BAGG1, GE1/0/15-GE1/0/16
  


BAGG1 is an aggregation port which comprises of Port 15-16
The Aggregation Link Interface Type is Dynamic which enables it as LACP.

 


Here is the full configuration from the HP2910:

 

Here is the full configuration from the HP2910:

HP2910-al Full Configuration :

Running configuration:

; J9147A Configuration Editor; Created on release #W.14.38

hostname "w-S-0"
ip access-list extended "100"
   10 permit udp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 eq 68
   20 permit udp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 eq 67
   30 permit tcp 172.16.66.0 0.0.1.255 172.16.64.105 0.0.0.0 eq 21
   40 permit tcp 172.16.66.0 0.0.1.255 172.16.64.105 0.0.0.0 eq 20
   50 permit tcp 172.16.66.0 0.0.1.255 172.16.64.105 0.0.0.0 gt 1023
   60 permit udp 172.16.66.0 0.0.1.255 172.16.64.25 0.0.0.0 eq 53
   70 deny ip 172.16.66.0 0.0.1.255 172.16.64.0 0.0.1.255
   80 permit ip 172.16.66.0 0.0.1.255 0.0.0.0 255.255.255.255
   exit
module 1 type J9147A
module 2 type J9165A
mirror-port 1
stack commander "wS"
stack member 1 mac-address ******************
interface 39
   name "Bridge-Agg-1"
exit
interface 40
   name "Bridge-Agg-1"
exit
interface 48
   ip access-group "100" in
exit
trunk A1 Trk1 LACP
trunk 39-40 Trk2 LACP
ip routing
vlan 1
   name "DEFAULT_VLAN"
   untagged Trk1-Trk2
   ip address 172.16.95.250 255.255.255.252
   no untagged 1-38,41-48
   exit
vlan 2
   name "Server"
   untagged 2-38,41-47
   ip address 172.16.65.254 255.255.254.0
   tagged Trk1-Trk2
   ip proxy-arp
   exit
vlan 3
   name "New vlan"
   untagged 48
   ip helper-address 172.16.64.25
   ip address 172.16.67.254 255.255.254.0
   ip proxy-arp
   exit
vlan 254
   name "Routing to 1801"
   untagged 1
   ip address 172.16.95.253 255.255.255.252
   exit
gvrp
ip route 0.0.0.0 0.0.0.0 172.16.95.254
snmp-server community "public" unrestricted
spanning-tree
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree priority 1

Thanks,

Peter

1 REPLY
Gerhard Roets
Esteemed Contributor

Re: Need Help Please - Problem creating a Link Aggregation between HPv1910 and HP2910-al

Hi Peter

 

Would you mind posting the following outputs from the 2910 with all the cables connected

show log -a

show trunk

show int brief

 

KR

Gerhard