HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

No Trunks in Trunk Membership

 
SOLVED
Go to solution
The-Dealman
Occasional Advisor

No Trunks in Trunk Membership

I have a procurve 1810G-24 Switch and i have created 4 trunks on the trunk configuration page, when i go to the trunk memebership page i don't see any Trunk ID's in the drop down menu. It just says none, why is that and how can i fix it?

 

P.S. This thread has been moved from ProCurve / ProVision-Based to Web and Unmanaged. -HP Forum Moderator

 

 

1 REPLY
The-Dealman
Occasional Advisor
Solution

Re: No Trunks in Trunk Membership

Nope that wasn't it. Unfortunate the 1810 is web GUI only & i was using IE11 to administer it, i had a thought to try another browser then i could see the trunks in the trunk id field. So i went back to IE then put in the ip address into the compatibility view settings then it worked in IE also.