Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

PoE device inactive when connected to V1910 365W

firmdale
Occasional Visitor

PoE device inactive when connected to V1910 365W

Hello

 

Trying to connect PoE device (Ascom IPBS1-A3/4F, Power over Ethernet IEEE 802.3af) to V1910 switch.

Device is not coming up as active on a switch, device's power LED keeps flashing like trying to log in or something. Tested on 5 other V1910 (2928HPWR) switches and getting same results.

Ascom device works OK on external PSU or Cisco PoE switch.

 

Any thoughts?

1 REPLY
btsforklift
Occasional Visitor

Re: PoE device inactive when connected to V1910 365W

Maybe an adapter of some sort is in order. PanOptic Technology makes quite a few elegant solutions for providing power to both PoE and non-PoE devices over Cat-5 cabling:
http://www.panoptictechnology.com/network-smart-adapters/

Good luck!