Web and Unmanaged
1748276 Members
4041 Online
108761 Solutions
New Discussion

Re: Power Led blinking at HP 1910 24G PoE Switch

 
didiapriansa
Collector

Power Led blinking at HP 1910 24G PoE Switch

Power led blinking and all port cannot use except console port, i use putty to open boot screen at serial port and click ctrl+b follow some tutorial also i already choose option number 5 (Restore to Factory Default Configuration) but show this message "Password recovery capability is enabled. To perform this operation, first
disable the password recovery capability using the undo password-recovery enable command in CLI." help me to fix this problem ..

2 REPLIES 2
HP-Browniee
Respected Contributor

Re: Power Led blinking at HP 1910 24G PoE Switch

Hello

Is there somthing connected on that switch at the moment? You might have loop there.

 

Kind regards

16again
Respected Contributor

Re: Power Led blinking at HP 1910 24G PoE Switch

from menu shown, try option 6 (=skip configuration)