HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve 1800-24G and J4858C mini-GBIC issue

 
Y Jeff
Occasional Contributor

ProCurve 1800-24G and J4858C mini-GBIC issue

Hi All,

New 1800-24G, running PB.02.09 code. Using a J4858C mini-GBIC in port 24. It just fast-blinks. Tried another J4858C, same thing. Rebooted switch, tried port 23, changed port speed, even re-flashed the latest downloaded PB.02.09 code, no diff. The code download page mentions this version is required for these GBICs to work, but they don't seem to. Any suggestions?

Thanks,
Jeff
2 REPLIES
Mohieddin Kharnoub
Honored Contributor

Re: ProCurve 1800-24G and J4858C mini-GBIC issue

Hi

I would contact HP Support in the area for investigating in this case, or to replace it.

Good Luck !!!
Science for Everyone
Y Jeff
Occasional Contributor

Re: ProCurve 1800-24G and J4858C mini-GBIC issue

Thanks - I did, and they determined the port was defective and are sending a replacement. Thanks for replying!

Jeff