1748136 Members
3920 Online
108758 Solutions
New Discussion

ProCurve 1800

 
Dave Arkfeld
Advisor

ProCurve 1800

Is PCM the only utility for disabling and enabling ports for test purposes? If so, what are the steps to set that up?

 

 

P.S. this thread has been moevd from ProCurve / ProVision-Based to Web and Unmanaged - Hp forum Moderator

Dave Arkfeld
2 REPLIES 2
paulgear
Esteemed Contributor

Re: ProCurve 1800

The ProCurve 1800 is a V-series switch and is managed best through the web interface. My PCM+ install is an older version, and it can't manage the 1800 at all. Newer versions may have some more functionality, but the web interface is your best bet.

Paul

P.S. The web-managed switches are not part of E series and really don't belong in this section.
Regards,
Paul
Patrick R
Frequent Advisor

Re: ProCurve 1800

Even the newer version 1810 is also limited ProCurve Manager only discover and map the the 1800 and 1810. SNMP cannot be used to configure them or send SNMP traps to a trap receiver 

 

See bellow for more details  

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02632114/c02632114.pdf