HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with Aggregation Link and Vlan

 
AlessandroG72
Frequent Visitor

Problem with Aggregation Link and Vlan

Network configuration has two switches:

 

Switch n°1 3Com Baseline Switch 2928 ip 10.10.0.110

Switch n°2 HP V1910-48G ip 10.10.0.105

 

In Switch 1 I have Vlan 1,20,100 with the following table:

Port 1-5 vlan 1 type=access untagged PVID 1

Port 6-10 vlan 20 type=access untagged PVID 20

Port 23-24 vlan 100 type=trunk untagged(100) tagged(1,20) PVID 100

 

In Switch 2 I have vlan 1,20,100 with the following table:

Port 1-5 vlan 1 type=access untagged PVID 1

Port 6-10 vlan 20 type=access untagged PVID 20

Port 24-48 vlan 100 type=trunk untagged(100) tagged(1,20) PVID 100

 

I have tried to create a static aggregation link between the two switches on port 23-24 and 24-48 but unfortunately the aggregation links did not work well and the ports were on standby status.

 

Can anybody please give me any advice on how to solve the issue?

 

Thanks, Alex