HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

QoS on V1910-24G PoE

 
SOLVED
Go to solution
cepacs
Occasional Contributor

QoS on V1910-24G PoE

I have a V1910-24G PoE switch and that we will be using for phones and data and I need to configure QoS.  All I would like to do is give the Voice VLAN priority over the Data VLAN.  How would I do this?  The QoS seems so confusing in the manual.  I have the Voice VLAN port state enable on the ports with phones connected, but I'm thinking this doesn't provide any QoS, right?

 

Any help with QoS would be greatly appreciated!

Thanks,

Sebastian

3 REPLIES
TJtheone
Advisor
Solution

Re: QoS on V1910-24G PoE

I'm not expert but you can try by enabling auto QoS or you can do in the port  trust the DSCP or IP proceeding value if your phone mark it or othervise set DSCP value to 5 in the port

cepacs
Occasional Contributor

Re: QoS on V1910-24G PoE

Thanks for the reply!  What does the DSCP value of 5 do?  The person setting up the Mitel 3300 asked me what priority I was giving voice on the switch.  He said he had the Mitel 3300 set to 6... is he talking about the DSCP?

cepacs
Occasional Contributor

Re: QoS on V1910-24G PoE

Ok, now I see... priority 6 goes along with 802.1p.  Thanks for the help!