HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up IPv6 with HP1920 and Edge Router Lite 3

 
Kaveman42
Occasional Contributor

Setting up IPv6 with HP1920 and Edge Router Lite 3

Hi my home setup includes a Ubiquiti ERL-3 and HP1920 with 5 Vlans. I would like to setup my network to use IPv6. through vlans. I haven't been able to find a tutorial online that will help me understand how to setup DHCPv6 on the HP1920. If you guys have any tutorials you can point me to, that would be greatly appreciated. BTW, I'm a total newb and just want to learn through practice.

Current Setup (ERL-3):
eth0-WAN
eth1-LAN (HP 1920)
> eth1.vlan1
> eth1.vlan2
> eth1.vlan3
> eth1.vlan4
> eth1.vlan5
eth2-Not used

2 REPLIES
parnassus
Honored Contributor

Re: Setting up IPv6 with HP1920 and Edge Router Lite 3

Do you mean configuring your HPE OfficeConnect 1920 to act as a DHCPv6 Relay Agent on each VLAN?
Kaveman42
Occasional Contributor

Re: Setting up IPv6 with HP1920 and Edge Router Lite 3

Yes, thats correct. I currently have DHCP relay setup for IPv4 and would like to learn how to also utilize DHCPv6.