Switch 1910-8G PoE

[sistemas07]

Hi 

I just buy a switch v1910-8g poe, I try to loggin with my web broser and i got the next message

"HP 1910-8G-PoE+ (180W) Switch Software Version Release 1111P01 en ab000000 Save Help Logout Are you sure to save the current configuration? HP 1910-8G-PoE+ (180W) Switch Software Version Release 1111P01 ie 0 0 admin 3"

I also tried to:

open with firefoz and chrome but i get the same message.

I renitialize the default factory software configuration

but I got the same message 

I´m looking for the firmware update software in the web, but i didn´t found the link to download

the current boot app is: flash:/V1910-CMW520-R1111P01.bin

hardware version is REV.A

CPLD version is 001

Bootrom version is 154

could you please give a clue, about this error message?  do I need to update the firmware??

[MichaelM55]

Hi,

never had that message. But you can also upgrade the firmware via console port.

You can find the latest software here: https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JG350A

[portlandbill]

Did you find a solution to this? I'm getting the same problem straight out of the box. i.e. No web interface.

[portlandbill]

I can answer my own question. You are right. Upgrading the bootrom/runtime fixes the problem. I can now use the web interface to manage the switch.

I upgraded to V1910-CMW520-R1513P06 using the console/serial port cable, Hyperterminal, and a TFTP srever (Tftpd32).

FWIW, HP should really be shipping these switches with fully functional software already loaded.