Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch 1910-8G PoE

sistemas07
Occasional Visitor

Switch 1910-8G PoE

Hi 

 

I just buy a switch v1910-8g poe, I try to loggin with my web broser and i got the next message

 

"HP 1910-8G-PoE+ (180W) Switch Software Version Release 1111P01 en ab000000 Save Help Logout Are you sure to save the current configuration? HP 1910-8G-PoE+ (180W) Switch Software Version Release 1111P01 ie 0 0 admin 3"

 

I also tried to:

 

open with firefoz and chrome but i get the same message.

 

I renitialize the default factory software configuration

 

but I got the same message 

 

I´m looking for the firmware update software in the web, but i didn´t found the link to download

 

the current boot app is: flash:/V1910-CMW520-R1111P01.bin

hardware version is REV.A

CPLD version is 001

Bootrom version is 154

 

could you please give a clue, about this error message?  do I need to update the firmware??

 

3 REPLIES
MichaelM55
Trusted Contributor

Re: Switch 1910-8G PoE

Hi,

 

never had that message. But you can also upgrade the firmware via console port.

You can find the latest software here: https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JG350A

portlandbill
Occasional Visitor

Re: Switch 1910-8G PoE

Did you find a solution to this? I'm getting the same problem straight out of the box. i.e. No web interface.

portlandbill
Occasional Visitor

Re: Switch 1910-8G PoE

I can answer my own question. You are right. Upgrading the bootrom/runtime fixes the problem. I can now use the web interface to manage the switch.

I upgraded to V1910-CMW520-R1513P06 using the console/serial port cable, Hyperterminal, and a TFTP srever (Tftpd32).

FWIW, HP should really be shipping these switches with fully functional software already loaded.