HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch HPE OfficeConnect série 1920

 
Springmann
Occasional Visitor

Switch HPE OfficeConnect série 1920

I have an HP OfficeConnect 1920 Series Switch but forgot the ip address of the same as I do to restore factory default if it does not have reset button?

1 REPLY
parnassus
Honored Contributor

Re: Switch HPE OfficeConnect série 1920

You should just connect thorugh Console cable (using the PuTTY client, as example <-- check HPE OfficeConnect 1920 Switch Series latest documentation - User Guide - on how to do that) and then, once logged into the Switch Console, execute the ipsetup CLI Command (which assign an IP address to Default VLAN Id 1) once again or, if you really want to re-initialize, execute the initialize CLI Command (which delete the Startup Configuration file and reboot the switch into the factory default state).