HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Switch - compatibility question 1420 2SFP

 
Stephane Robert
Occasional Contributor

Switch - compatibility question 1420 2SFP

Hello everyone, actually I use 1810-24 switches with X111 SFP, 100 FX moduls  (model J9054C)
Now I want to buy 1420-24 switches and I can't find any informations about compatibility with the X111 modul

Can someone tell me if 1420 switch and X111 modul are compatible ?

thank you !


Stephane

 

1 REPLY
parnassus
Honored Contributor

Re: Switch - compatibility question 1420 2SFP

If you are going to purchase HPE OfficeConnect 1420-24G 2SFP (JH017A) switches, the HPE 1420 Switch Series QuickSpecs reports (see here) only these SFP Transceivers:

  • HPE X121 1G SFP LC SX Transceiver (J4858C)
  • HPE X121 1G SFP LC LX Transceiver (J4859C)
  • HPE X121 1G SFP RJ45 T Transceiver (J8177C)
  • HPE X120 1G SFP RJ45 T Transceiver (JD089B)
  • HPE X120 1G SFP LC SX Transceiver (JD118B)
  • HPE X120 1G SFP LC LX Transceiver (JD119B)

as supported.

So, if your plan is to use the existing Fiber Optic uplink (is it a long - more than 550 meters - run?), the most proper supported Transceiver types should be HPE X121 1G SFP LC LX Transceiver (J4859C) or HPE X120 1G SFP LC LX Transceiver (JD119B).

Note the LX (that's for cable length up to 10 km).

If you have other requirements (a short run, let's say below 550 meters) maybe a SX (generally with a 850 nm central wavelenght) type should suffice.

Consider that both J4859C and JD119B have:

  • Connector Type: LC
  • Central Wavelength: 1310 nm
  • Multi-Mode maximum distance: 550 meters
  • Single-Mode maximum distance: 10000 meters (10 km)

So the SFP Transceiver selection boils down to what type (especially its length and its mode) of Fiber Optic uplink you have to reconnect to.