HPE Community
Web and Unmanaged
1753736 Members
4741 Online
108799 Solutions
New Discussion юеВ

Re: Trunk between HP Procurve 1800-24G and 1810G

 
FRASAYA
New Member

тАО12-10-2009 11:24 AM - last edited on тАО12-26-2013 01:24 AM by

тАО12-10-2009 11:24 AM - last edited on тАО12-26-2013 01:24 AM by

Trunk between HP Procurve 1800-24G and 1810G

Hello,

I need configure a static trunk between two swtiches. HP 1800-24G and the new HP 1810G (24 ports)

I tried everything but it is imposible.

Someone can help me, please?

Thank you very much.

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp Forum Moderator

0 Kudos
3 REPLIES 3
Mohammed Faiz
Honored Contributor

тАО12-11-2009 03:37 AM

тАО12-11-2009 03:37 AM

Re: Trunk between HP Procurve 1800-24G and 1810G

Hi,

What commands have you tried so far and what are the problems you're seeing?
0 Kudos
FRASAYA
New Member

тАО12-11-2009 03:55 AM

тАО12-11-2009 03:55 AM

Re: Trunk between HP Procurve 1800-24G and 1810G

The 1800 Procurve series is only web interface.

I solved the problem today. The firmware version of 1810G (P 1.8) was the problem.

The new version P 1.14 works fine.

Thank you very much.
0 Kudos
switches, hubs, modems
New Member

тАО01-27-2010 10:45 AM

тАО01-27-2010 10:45 AM

Re: Trunk between HP Procurve 1800-24G and 1810G

Hello,
I just got the procurve 1810g siwtch. i like to setup private network with 8 server for testing a san storage. I do not know how to do that. My ip address is 192.168.0.5 to 17.
No need for setup trunk or vlans. Please help out. I need step by step instruction. Since i am realy new in this area.

thanks
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.