Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

Trunk between HP Procurve 1800-24G and 1810G

 
FRASAYA
Occasional Visitor

Trunk between HP Procurve 1800-24G and 1810G

Hello,

I need configure a static trunk between two swtiches. HP 1800-24G and the new HP 1810G (24 ports)

I tried everything but it is imposible.

Someone can help me, please?

Thank you very much.

 

 

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged. - Hp Forum Moderator

3 REPLIES
Mohammed Faiz
Honored Contributor

Re: Trunk between HP Procurve 1800-24G and 1810G

Hi,

What commands have you tried so far and what are the problems you're seeing?
FRASAYA
Occasional Visitor

Re: Trunk between HP Procurve 1800-24G and 1810G

The 1800 Procurve series is only web interface.

I solved the problem today. The firmware version of 1810G (P 1.8) was the problem.

The new version P 1.14 works fine.

Thank you very much.
switches, hubs, modems
Occasional Visitor

Re: Trunk between HP Procurve 1800-24G and 1810G

Hello,
I just got the procurve 1810g siwtch. i like to setup private network with 8 server for testing a san storage. I do not know how to do that. My ip address is 192.168.0.5 to 17.
No need for setup trunk or vlans. Please help out. I need step by step instruction. Since i am realy new in this area.

thanks