Unable to enable 802.1x globally on HPE 1950 JG963A

[MilesT]

Hello,

I'm trying to setup 802.1x with a radius server and am following the example in the manual.

The manual says the following:

Configure 802.1X on the switch:
a. From the navigation tree, select Security > Access Control > 802.1X.
b. Enable 802.1X globally.
c. Enable 802.1X on GigabitEthernet 1/0/1, and set the access control method to MAC-based.
d. On the advanced settings page for GigabitEthernet 1/0/1, set the port authorization state to
Auto and set the mandatory ISP domain to dm1X.

When I go to Security, Access, 802.1X and click the Enable 802.1X button, I receive:

Error
Can't enable 802.1X for port security is enabled.

I looked online for how to disable port security and found the following, but it wasn't very useful :-)
https://www.youtube.com/watch?v=bO_dUTBcTOw

A little help please.

Thanks

[SantoshPG · Accepted solution]

Hi,

There is an option to disable port security. 

Go to Security tab in the web gui and you should find an option to disable port security there. 

[Thompson79]

Ah, the round power button at the top right.. Thanks.