Upgrade HPE 1950 (JH295A) firmware

[akg7]

Hello,

Its better to save the running image as backup image.

Proactively it is always advised to set the backup image.

The image is already in flash, you just need to set as back up and new image as main image.

Thanks!

[adam900331]

What is the correct commands to set the backup startup image?

[akg7]

Hello,

Try this command:

boot-loader file boot flash:/1950_12xgt-cmw710-boot-r5103p03.bin system flash:/1950_12xgt-cmw710-system-r5103p03.bin all backup

Thanks!

[adam900331]

Thanks.

[adam900331]

I have another question which is regarding to the firmware upgrade. The current firmware version is: 5103P03

The latest update is: 5106P06

Can I upgrade directly to the new version? There is an intermediate firmware between 5103P03 and 5106P06.

Thanks.

[akg7]

Hello,

There is no intermediate version required.

You can do direct upgrade to 5106P06.

Thanks!

[adam900331]

Hy akg7!

I succesfully upgrade our HPE 1950 IRF stack firmware! Thanks for Your professional help.

Adam

[akg7]

Hello @adam900331 ,

It's good to hear that device is successfully upgraded. Cheers...:)

Thanks!