V1900 PCM+

[Weber_1337]

Helo!

I want to integrate some V1900-8g into the PCM+ 3.2 both have the latest software installed. Due to the fact that this Switch does not support CDP/LLDP, I tried to initialize the manual discovery but when the Write Community Test starts an error appears. Like I have entered the wrong data but its correct.

Someone an idea?

[Birthwell]

This switch does not support SNMP protocol.
It is a (HTTP based) web managed switch.
Hope this helps.

[Birthwell]

This switch does not support SNMP protocol.
It is a (HTTP based) web managed switch.
Hope this helps.

[Birthwell]

This switch does not support SNMP protocol. PCM+ is an SNMP protocol based application.
The switch is just a (HTTP based) web managed switch.
Hope this helps.

[Weber_1337]

Thanks for your reply.

I am just wondering, if thw Switch does not Support SNMP, why were I able to configure the Read and Write Community properly in the Switch?

The above described Error apears while the PCM Cheks the Read and Write Community connectivity. The Read Community works fine but the Write Community produces the error.