V1910 28Port Freezes ! with only two ports active.

[Tinchole]

Soft ver 5.20 Release 1101P10

HW Ver: Rev B

BootRom ver: 119

Cpu usually 1-7%

Mem: 31%

After multiple configurations, i have deployed the simplest scenario for troubleshooting from an out of the box configuration:

1 link 100Mbps in 1/0/2 -- Video Streaming from 25 IP Cams

1 link 1Gbps in 1/0/8 --- Win Server with IP Cam Software

Flow Control reports on 1/0/2 an Average of 3031345 Bytes/sec

Thing is the SW is complete unstable with this scenario also. It freezes and completely stops responding randomly after an estimated of 10hours aprox.

I have installed a syslog on the Win server to catch all events from the sw, no news so far.

Any suggestions?

Thanks

[TooMeeK]

Broken switch?

Shouldn't hanging.

I use 5 or 6 of V1910 and they never hang, even using 100% of link (123382696 Bytes/s)