Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

V1920 switches and changed default vlan

 
SOLVED
Go to solution

V1920 switches and changed default vlan

Hi all,

have two procuve V1920-48G switches, have done this simple setup.

VLAN 1 Default VLAN

VLAN 2 LAN

VLAN 200 PRIVATE LAN

Have made the ports connecting the two hybrid, with vlan 2 untagged and vlan 200 tagged.

I have selected so VLAN 1 has NO member on both switches.

But the result is that ports tagged/untagged with vlan 200 works on both sides, but the vlan2 which is ONLY untagged on all ports, does not go from switch 1 to switch 2

When using vlan 1 and deselecting all vlan 2, it works ?!

Odd or just me :-)

 

best regards

Martin  

Best regards
Martin ;-)
2 REPLIES 2
srini_c
Occasional Advisor
Solution

Re: V1920 switches and changed default vlan

Hello Martin,

Make sure the untagged VLAN should be the same as the default VLAN on both devices like below.

interface Ethernet1/0/1
port link-type hybrid
port hybrid vlan 200 tagged
port hybrid vlan 2 untagged
undo port hybrid vlan 1
port hybrid pvid vlan 2

 

I am a HPE Employee

Re: V1920 switches and changed default vlan

Thanks for your reply  :-)

I forgot about the PVID!

 

best regards

Martin

Best regards
Martin ;-)