VLAN + Trunk on v1910 & 3Com 2928

[ejonzeck]

Hey guys,

i have the following setting & stuck in the vlan-config:

1 HP v1910-24G Software Release 1513P15

1 3Com 2928-SFP Plus Software Release 1513P15

both are connected via fiberglass (2 GBics on each switch). the GBic Ports on each switch are in a link aggregation brigde. no vlan at all, all porta in access-mode.

now i try to setup a vlan & send it across the fiberglass.

ich tried to set up it in the following way (on both switches):

1. created a vlan, ID 2

2. untagged member GE1/0/1

3. changed link mode on the Bridge-Aggregation-Group to trunk

4. tagged Bridge-Aggregation-Group with VLAN-ID 2

now i lost connection between the switches.

can you help me?