Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

VLAN config for seperate rental units

John_299
Occasional Visitor

VLAN config for seperate rental units

I am new to the ProCurve 1910 and VLANS.  I have 6 -16 port 1910 s.  One is the primary switch for the building.  The other 5 are in individual units.  I wan to set up the core switch to service the 1910 in each individual unit.  The purpose is so each unit can access the internet but not see the other units.  I will need to manage all of the 1910's from one of the units.  I suspect this is simple but would appreciate some guidance.  The core switch will be connected to a router providing DHCP for the network.

 

Thanks

 

 

P.S. this thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to Web and Unmanaged - Hp Forum Moderator