HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 1810G-24 Internal network file transfer rate can not exceed 50M

 
fox017
Occasional Visitor

hp 1810G-24 Internal network file transfer rate can not exceed 50M

Internal network file transfer rate can not exceed 50M

How to fix

2 REPLIES
parnassus
Honored Contributor

Re: hp 1810G-24 Internal network file transfer rate can not exceed 50M

What do you mean with "internal network file transfer rate"?

Did you perform a performance test between, say, an Host A connected on one interface of your HP ProCurve 1810GG-24 (J9450A) Switch and an Host B connected to another interface (considering both interfaces members of the same VLAN for the sake of simplicity) using a tool like iperf/iperf3?

If physical cabling is OK and certified (I mean: certified Cat.5E/Cat.6 Ethernet patch cords between Hosts used for test and your Switch once both involved devices are connected directly each-others without any other office's additional cabling in between) you should reach easily about 1Gbps = 1000Mbps = about 100MBps...if office's cabling is good (=certified) too, the same results can be obtained when hosts and Switch are connected through office's cabling. 

fox017
Occasional Visitor

Re: hp 1810G-24 Internal network file transfer rate can not exceed 50M

thanks!
Try it!