hpe1920 series do not allow Multipoint services trough trunks.

[PeoplesProjects]

Hi,

i have 3 swicthes, they are in terconnected trough trunks.

All traffic runs fine only my multipoint services (windows multipoint 2012 servers) are not running trough the trunking ports. Only the switch where the multipoint server is connected to allow the services to the zero clients on his ports. But on the other switches there the zero clients gets an IP address but after that they won't connect to the Multipoint server.

Any idea why and what is blocking the traffic? And what i can do about this?

Thank you.

[parnassus]

Considering these scenarios, are you then saying that RDP over LAN - from hosts connected on uplinked Switches (and so not on the Switch where the MultiPoint Server is deployed) - doesn't work?

[PeoplesProjects]

I use 2 ports using link aggregation to connect per other switches in the rack.

On switch A i connected our 3 Multipoint servers and when i connect the zero clients to this switch the connect without a problem, but on the switch above they get an ip and then are waiting for assigned host.

i don't know why they can't connect trough the trunks as they can on the switch A where the servers also connected to.