Web and Unmanaged
cancel
Showing results for 
Search instead for 
Did you mean: 

simple QoS on 1920G

 
metebalci
Occasional Visitor

simple QoS on 1920G

Hello,

I have two wired/wireless networks on the switch, one is the default/untagged vlan 1 and the other is one wired client and one wireless client forming another vlan 508 which I would like to give higher priority. The wired client is directly connected to port 1, and the AP wireless client connected is on port 3, and the AP tags the vlan information. The traffic I would like to give priority is mostly/always from wired client to wireless, so from port 1 to port 3. Is that enough if I set the port priority of port 1 to something higher and then set the queues on port 1 and 3 accordingly (either give weight or setup an SP) ? Do I need a classifier/behavior/policy and port policy assignment for QoS to work ?

Thanks.

Mete

1 REPLY 1
bala5
Frequent Advisor

Re: simple QoS on 1920G

Hi ,

  Both the condition should work but as a best practice you can use QoS policy and apply to the respective vlan or port

 

Bala
I work for HPE

Accept or Kudo