Web and Unmanaged
1748161 Members
3571 Online
108758 Solutions
New Discussion

wireless module password change

 
jhathaway1
Occasional Visitor

wireless module password change

I cannot get into my Procurve wireless module through the web interface because the password seems to be corrupted or incorrect for some reason.  I can get into the module through the switch and do a cli session.  Is there a command to change the snmp-server manager.  I do a show manager and I can see that the manager and operator have passwords using encryption.  I would like to either elimate the authentication or change the password.

2 REPLIES 2
jhathaway1
Occasional Visitor

Re: wireless module password change

I figured it out in case anyone is interested.

snmp-server user manager v3 encrypted auth md5 "passowrd here without quotes"

jefflj
Frequent Advisor

Re: wireless module password change

I'm assuming you are referring to an HP MSM7xx Mobility controller?  Have you changed the username and/or password from the default values?  For HP mobility controllers, the default username/password is admin/admin.  
For help with CLI commands, as the CLI is extensive, I suggest you go to http:/www.hp.com, select Support and Drivers, then Product Support & Troubleshooting, enter your product name and find the CLI reference for your product.   You'll get much farther.