Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
cancel
Showing results for 
Search instead for 
Did you mean: 

LDAPUX with SASL/GSSAPI

John M Clark
Occasional Advisor

LDAPUX with SASL/GSSAPI

Has anyone configured HP-UX 11i V3 as an LDAPUX Client to a Windows 2003 Domain Controller using the SASL/GSSAPI authentication. I have configued LDAPUX with the SIMPLE authenication method. But with SASL/GSSAPI using a host account we just cannot search or connect to the DOMAIN controllers
4 REPLIES
Ivan Krastev
Honored Contributor

Re: LDAPUX with SASL/GSSAPI

Have you checked this documentation - http://docs.hp.com/en/J4269-90084/ch07s03.html

regards,
ivan
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Hi, the problem appears to be concentrated about the kerberos authentication. While performing a kinit or kdestroy for fault finding we receive Client not found in the Kerberos database.
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Hi, not sure if you are able to assist further, but from the pamkrbval -v -ia64 command I get
Client no found in the Kerberos Database. Our Windows Admin advises the AD is set up correctly.

regards
Highlighted
John M Clark
Occasional Advisor

Re: LDAPUX with SASL/GSSAPI

Issue was down to kerberos issues