Windows Server 2003 for 64-Bit Extended Systems
cancel
Showing results for 
Search instead for 
Did you mean: 

rx4640 with emulex LP1050

LEO SIMON_1
Advisor

rx4640 with emulex LP1050

We are facing a problem when using rx4640 with emulex LP1050 ( AB467A ) running on windows 2003 with SP1
I had already upgrade the FC card with the latest Firmware based on HP web site

The server can't boot when we activate the FC card but we are not facing a problem when we remove the SP1 or using LP9802 (AB232A ) so how to solve this issue ?
1 REPLY
kris rombauts
Honored Contributor

Re: rx4640 with emulex LP1050

Hi Leo,

can you be more specific as to the problem "server can't boot".

-> how far do you get in the boot process
(i.e. do you get to the EFI shell and
does Windows start loading, do you get a
SAC> prompt etc etc ?)

-> can you boot when the FC card is
installed but no fibre cable is
connected to the SAN/disk array ?

-> any error message or logs you can provide

-> do you use the storport driver for the
AB467A cvard ?


Kris