Showing results for 
Search instead for 
Do you mean 

DL380p G8 RAID 1+0

Go to Solution
Occasional Advisor

DL380p G8 RAID 1+0

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C:  RAID 1

D: RAID 1+0

E: RAID 1+0



Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:


IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5


Am I going to have to download all the drivers into a separate USB and do a manual install ?

Occasional Advisor

Re: DL380p G8 RAID 1+0

Is this even possible?
Occasional Advisor

Re: DL380p G8 RAID 1+0


I was apparantly brain dead yesterday