BladeSystem Forums have moved here
To make BladeSystem information easier to find, we have moved the BladeSystem forums here, to Servers and Operating Systems.
Showing results for 
Search instead for 
Do you mean 

DL380p G8 RAID 1+0

SOLVED
Go to Solution
Occasional Advisor

DL380p G8 RAID 1+0

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C:  RAID 1

D: RAID 1+0

E: RAID 1+0

F: RAID 0

 

Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:

 

IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5

 

Am I going to have to download all the drivers into a separate USB and do a manual install ?

2 REPLIES
Occasional Advisor

Re: DL380p G8 RAID 1+0

Is this even possible?
Highlighted
Occasional Advisor

Re: DL380p G8 RAID 1+0

Nevermind

I was apparantly brain dead yesterday