1748149 Members
3498 Online
108758 Solutions
New Discussion юеВ

HORCM

 
gunasekaran.j
Advisor

HORCM

hi all

Could you please explain how check the pairstatus in Windows2004 for XP Arrays.

Thanks
Guna Sekaran
3 REPLIES 3
IBaltay
Honored Contributor

Re: HORCM

Hi,
it could be done via the pairdisplay command
- page 132:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01634012/c01634012.pdf?jumpid=reg_R1002_USEN

the pain is one part of the reality
gunasekaran.j
Advisor

Re: HORCM

thanks for the information.

when i am trying the below command

pairdisplay - d qqlen

it shows the below error

14:26:25-23280-05232- [pairdisplay][exit(251)]
[EX_ATTHOR] Can't be attached to HORC manager
[Cause ]:Couldn't connect with the HORC manager.
[Action]:Please check if HORC manager is running or if HORCMINST is set correctly.
IBaltay
Honored Contributor

Re: HORCM

Raid Manager (RM) configuration process is described in the manual above: RM instance must run and the HORCM config files should be configured/edited before the RM could be used.
the pain is one part of the reality