Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Forward bonjour between vlan and access switch

 
Highlighted
Occasional Contributor

Forward bonjour between vlan and access switch

Hi, ive setup 5406 as core and 2530 as access. What do i need to configure in order to forward bonjour between 2 access switch. Do i need to configure mdns profile on each access switch ?

3 REPLIES 3
Highlighted
Honored Contributor

Re: Forward bonjour between vlan and access switch

How are both interconnected? have you transported required VLAN between both switches (tagging the uplink)?
I'm not an HPE Employee
Kudos and Accepted Solution banner
Highlighted
Occasional Contributor

Re: Forward bonjour between vlan and access switch

yup, the vlan already setup on core and access and already interconnected. Pinging between vlan success. i read that i need to setup igmp, but there's also mdns on aruba switch. Which one do need to configure or both ?

Highlighted
Honored Contributor

Re: Forward bonjour between vlan and access switch

Hi! IGMP isn't used for Bonjour.

Supposing you're dealing with an Aruba switch based on ArubaOS-Switch OS (which is the old well known HP ProVision OS of HP ProCurve, actually rebranded, enhanced and developed by Aruba of HPE) have a look at this article.

I'm not an HPE Employee
Kudos and Accepted Solution banner