hp 2920-48g j9728a Reset does not work

[PeterSunko]

I got a used hp 2920-48g j9728a switch and heard that I can put it into operation.
I have to reset it - unfortunately I can't do that.
If I want to do the following:
1. the " Reset " and the "Clear" button is activated
2. hold the "Clear" button and release the "Reset" button.
3. when the test LED starts to flash, release the "Clear" button.
4. after the self-test with the factory settings.
unfortunately it does not work - in my case the "Test LED" does not start flashing.
What am I doing wrong - or can I do war differently?

[akg7]

Hi,

Do you want to reset the switch to factory default configuration if yes then  pelase follow below steps on last row:

or you can refer below link for  HP 2920 Switches Installation and Getting Started Guide

section: Reset and clear buttons on Pg-1-12

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03898362

Thanks!

[akg7]

Hi @PeterSunko ,

Has my post helped you to answer your query?

Thanks!