HPE Community
Aruba & ProVision-based
1752571 Members
5188 Online
108788 Solutions
New Discussion

Re: ProCurve 2920 stacking modules

 
Aquarium
Occasional Collector

‎12-14-2015 07:03 AM

‎12-14-2015 07:03 AM

ProCurve 2920 stacking modules

 

Hi,

I have some ProCurve 2920 switches with stacking modules and in case of failure, I would know if they are hot-swappable or I have to turn off the switch with failed module and replace it??

Thanks!

0 Kudos
1 REPLY 1
Richard Litchfield
Respected Contributor

‎02-20-2016 06:28 AM

‎02-20-2016 06:28 AM

Re: ProCurve 2920 stacking modules

The switch will reboot when it rejoins the stack anyway (to make sure it has the current config)... If you have availability concerns, you need to make sure your device (eg server, switch) is connected to both switches in the stack with an LACP connection.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.