HPE Community
Aruba & ProVision-based
1753666 Members
5988 Online
108799 Solutions
New Discussion

Re: Routable port on E5500G-24 port SFP

 
ASAP
Occasional Contributor

‎08-14-2011 08:29 PM

‎08-14-2011 08:29 PM

Routable port on E5500G-24 port SFP

HI,

 

 I am unable to configure SFP port 24 as a routable port. I would like to connect port 24 configured with IP address 10.129.110.1/255.255.255.252 to another office, so that traffic to 192.168.100.0/24 should be routed to 10.129.110.1.

Refer attached exisiting configuration for details.

Appreciate your help in this.

 

Regards, Prashanth

0 Kudos
1 REPLY 1
cenk sasmaztin
Honored Contributor

‎08-15-2011 12:08 AM

‎08-15-2011 12:08 AM

Re: Routable port on E5500G-24 port SFP

E 5500G swich unable set route port (same cisco switch )

 

therefore you must create vlan for this port and assign ip address this vlan

 

for example

int 1 access-port for vlan 99

vlan 99 to be  L3 interface and able route other network....

 

all the best

cenk

The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.