Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Unable to gain web or telnet access for management?

 
SOLVED
Go to solution
Highlighted
Advisor

Unable to gain web or telnet access for management?

Hello folks,

I recently joined a company with several Procurve switches.  There are a couple of 2848 switches (A and B).  Both are configured with IP address on default VLAN 1.  I able to gain web and telnet access to switch A, but not switch B.  Both switch configs are attached.  There is more snmp configuration and an authorized manager setting that is not on switch A. 

Could it be snmp settings or the authorized manager entry causing lack of web and telnet access?  Thanks.

3 REPLIES 3
Highlighted
Valued Contributor
Solution

Re: Unable to gain web or telnet access for management?

Looks like Ip authorized manager might be the cause. Here is the document on how to configure: http://whp-aus2.cold.extweb.hp.com/pub/networking/software/Security-Oct2005-59906024-Chap11-Auth_IP.pdf

Hope this helps!

Highlighted
Advisor

Re: Unable to gain web or telnet access for management?

Thank you for responding!

I am thinking that if I delete that entry (no authorized manager like the other switches) telnet and web access should start working.

Will try it on Monday and update this thread.  Thanks again!

Highlighted
Advisor

Re: Unable to gain web or telnet access for management?

I tested this on a lab switch and removing the IP authority entry made the difference in general telnet/web access.  I need to change it on our production switch.  Will close this thread as resolved for now.

Thanks!