BL servers reboot when time on Enclosure is differ

[Willson_1]

We have Enclosure C7000 and some BL460 and BL490. As I understand when time on Enclosure differ from Blade, its go to reboot.
On ILO log next messages:
iLO 2 12/23/2009 07:43 12/23/2009 07:43 1 On-board clock set; was 12/23/2009 11:43:49.
iLO 2 12/23/2009 07:56 12/23/2009 07:56 1 Server reset.
iLO 2 12/23/2009 07:56 12/23/2009 07:56 1 Server power restored.

Can I disable auto reboot when time is differ?

[Terri Harris]

There was an issue known before OA fw 2.41 where the OA module or modules might reboot, but not where the OA time might cause a blade server to reset.

What is the OA firmware and iLO2 firmware running on this enclosure?

Is it a BL460 G1? G5? What is its System BIOS revision?

What this just one server that reset?

[marcus1234]

hmmm ...willson

try
HP BladeSystem Firmware Deployment TooL

Please see the c-class bladesystem firmware compatibility matrix:

http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html


after all is done issue reboot command to Onboard admin , via cli

then if you still have issues physivcally pull out oa and reseat it

do feedback on issue ...

[Willson_1]

Im always try install last firmware when it released.
OA Administrator firmware: 2.60 Aug 31 2009
BL460 G6 ILO firmware: 1.80 Oct 30 2009
BL460 G6 ROM Version: I24 10/01/2009
BL490 G6 ILO firmware: 1.80 Oct 30 2009
BL490 G6 ROM Version: I21 10/01/2009

We have six BL servers, each server are reboot when time is differ.

[Terri Harris]

Willson,

Engage the HP c-class blade team for this issue. Have ready/available the OA inventory report (Show All) for at least two of the c7000 enclosures. We (HP) do need to troubleshoot this for you.