HPE Community
BladeSystem - General
1753449 Members
6259 Online
108794 Solutions
New Discussion юеВ

Re: BL460 G6 "Machine Check Exception"

 
David Orwig
Regular Advisor

тАО01-04-2010 07:43 AM

тАО01-04-2010 07:43 AM

BL460 G6 "Machine Check Exception"

Having issues with a 460G6 connected to a flex-10 in a C7000 chassis. Trying to reload using RDP (had success in the past) but now we started getting a PXE-E63 error message(Error while initiating the NIC). After several attempts and reconfigures of the flex-10 server profiles we now get "Uncorectable Processor Machine Check Exceprtion" during post. This is NOT a PXE / RDP issuem,we can still load other blades in this enclosure. Any Ideas?? I'm planning on replacing the system board first.
0 Kudos
2 REPLIES 2
Florian Heigl (new acc)
Honored Contributor

тАО01-05-2010 07:59 PM

тАО01-05-2010 07:59 PM

Re: BL460 G6 "Machine Check Exception"

Well guessing by the message the CPU would be the first thing to replace. :)
yesterday I stood at the edge. Today I'm one step ahead.
0 Kudos
David Orwig
Regular Advisor

тАО01-06-2010 05:23 AM

тАО01-06-2010 05:23 AM

Re: BL460 G6 "Machine Check Exception"

Replaced the system board, all is good.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.