BladeSystem - General
1829962 Members
2124 Online
109998 Solutions
New Discussion

BL460c G6 rebuild do not start

 
hogust
Advisor

BL460c G6 rebuild do not start

One of the HDD has failed. I stopped the server, replaced the HDD, started the server. ACU now tells me "Ready for recovery", but  rebuild will not start.
I have read here "RAID 1 (+0): breaking mirrors and rebuilding drives" rebuild will start automatically if hot insert the HDD, and if not, the controller will disable the volume. I can not stop the server again, what can I do to start the rebuild.

1 REPLY 1
TVVJ
HPE Pro

Re: BL460c G6 rebuild do not start

 

Could you generate the Array Diagnostics Utility report from ACU and upload it please?

 

Click tab Diagnose in ACU and click generate report to get it.

 

 

Regards,

 

Vijayasarathy



I work at HPE
HPE Support Center offers support for your HPE services and products when and how you need it. Get started with HPE Support Center today.
[All opinions expressed here are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo