BL460c Red Health LED after reboot in C3000 Chassis

[UselessUser]

Hi,

I have a C3000 chassis filled with 8 BL460c's.

The Enclosure is at Firmware 2.25 Hardware version B0.

The iLo's on all blades is a mix of 1.43 and 1.50.

Intermittently when I reboot a server it fails to come back up, and the health LED is red. iLo display just shows a grey screen, no post or anything..

The only way I can get it back is to pull out the blade and put it back in...

How can I get around this?? I looked to update the Enclosure firmware but under the C3000 it asks me to contact my HP Representative???

Also is there an easy way to fire updates to all the blades (No proper HPSIM yet!)

[Raghuarch · Accepted solution]

First Update your Blade iLO to version 1.70.
Form OA CLI " update ilo all "

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1135772&prodTypeId=18964&prodSeriesId=1146658&swLang=8&taskId=135&swEnvOID=1005#29213

Then Update your OA to version 2.41
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=3188465&prodNameId=3664326&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-4f43215688734d8282d116ba51

[UselessUser]

Hi,

Thank you, I have begun updating iLO's and am no longer experiencing the problem..

I have updated the Enclosure too!