BL685G7 Mezzanine port mapping

[gregersenj]

On second thought, its an extremely bad idea to post the show all, because it shows way to much IP adresses node names etc.

so don't that.

But i don't understand your configuration.

What do you have in IC 1 and 2.

BR
/jag

[ES_mycro]

Hello everyone,

i found this conversation with the search and it is exactly the same problem we are experiencing.

I have a c7000 with ethernet passthrough in slot 1 and 2, FC passthrough in slot 5 and 6 and infiniband switch in slot 7-8 (dual switch).

Within the bl 685G7 I installed the HP BLc QLogic 4X QDR IB Mezz HCA in mezzanine 3 but just after that the blade wont start and if I check in the enclosure administrator I can see this:

5: HP 4Gb Fibre Channel Pass-thru Module for c-Class BladeSystem
Type: Fibre
Width: Single
Status: Mismatch
Port-----------1---2---3---4---5---6---7---8---9---10---11---12---13---14---15---16
Status------OK--------------------------------- OK-- OK--XX
Blade -------1------------------------------------ 9--- 10---3
Mezz/Nic----2-------------------------------------2----2----3

Port----------1-------------------------------------1----1----3

6: HP 4Gb Fibre Channel Pass-thru Module for c-Class BladeSystem
Type: Fibre
Width: Single
Status: Mismatch

Port-----------1---2---3---4---5---6---7---8---9---10---11---12---13---14---15---16
Status------OK--------------------------------- OK-- OK--XX
Blade -------1------------------------------------ 9--- 10---3
Mezz/Nic----2-------------------------------------2----2----3

Port----------2-------------------------------------2----2----4

7: HP BLc QLogic 4X QDR IB Switch
Type: IFB
Width: Double
Status: OK
Port ----------17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Status -------------------------------------------------OK
Blade ---------------------------------------------------3
Mezz/Nic -----------------------------------------------3
Port------------------------------------------------------1

Does this means that every port have two sub channels anyway, which for the first ports connect to slots 7-8 from the enclosure backplane and for the second ports connect to slots 5-6??

Thank you everyone in advance for any help.

Emanuele.