HPE Community
BladeSystem - General
1751883 Members
5737 Online
108783 Solutions
New Discussion юеВ

BL870c i2 mp critical error

 
paveldp
New Member

тАО10-15-2010 04:21 AM

тАО10-15-2010 04:21 AM

BL870c i2 mp critical error

Hi guys. I have problem with blades bl870c i2.
There are 4 blades installed in a Farm.
And today in the morning I have critical errors on each blade. It is Management processor error.
And now I have not access to MP. I can reset power on servers via OA CLI. And after reset it works fine (but I'm not sure its at a long time). I can not reset it on all blades, because some of it fork in production. Please help me troubleshut this error and get solution.
Thank you in advance.
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО10-15-2010 10:41 AM

тАО10-15-2010 10:41 AM

Re: BL870c i2 mp critical error

A detailed error message would be helpful.

Make sure the OA firmware is up to date.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
paveldp
New Member

тАО10-15-2010 11:55 AM

тАО10-15-2010 11:55 AM

Re: BL870c i2 mp critical error

OA firmware - 3.11
It is error message in OA.
Servers are in critical state. On tab "Information" Near field "Management Processor" - just "critical".
After it has been reseted - no critical errors in system log, just warnings "The system variables are mismatched".
I can get logs tomorrow and attach screen shots.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.