cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Blade BL450c

 
Highlighted
Frequent Advisor

Blade BL450c

What is the meaning of this error?
The blade is a ProLiant BL460c G1.

Error: Server Blade Enclosure Inadequate Power To Power On: Lost Redundant Power (Enclosure Serial Number USE72651RD, Slot 9)
7 REPLIES 7
Honored Contributor

Re: Blade BL450c

Hello Feljav,

Check the power LEDs; Check Attachment;
Not enough power for the blade to power ON.
Where did you get this error ?

Regards.
Highlighted
Frequent Advisor

Re: Blade BL450c

Everithing is ok. I got the error in the IML log tab in the HP Onboard Administrator's page. Any suggestion!
Highlighted
Honored Contributor

Re: Blade BL450c

Highlighted
Frequent Advisor

Re: Blade BL450c

Yes
Highlighted
Honored Contributor

Re: Blade BL450c

Hi Feljav,

There is no need to worry if you see it when you try to power on multiple blades.

The behavior is:
When the Blades power on they request for certain amount of Power depending on the particular blade, amount differs.

When the request is not processed by the OA the iLO logs the message which you are seeing in the IML.
Most of the times you see it when you insert more then 5 or 6 blades. Eventually blades will power on.

I hope you are able to power on blades?

Regards,
Raghuarch






Highlighted
New Member

Re: Blade BL450c

This error will come when the redundancy is lost.
In your case , i guess, you have selected either "AC Redundancy or Power Supply Redundancy" as your power mode.
And you may have removed any redundant power supply which caused the redundancy to be lost.
Highlighted
New Member

Re: Blade BL450c

Any found a resolution to this issue. I am seeing it on some other HP blade models as well.