BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade HP C7000 - Server Blade Enclosure Power Request Denied

 
Highlighted
Occasional Contributor

Blade HP C7000 - Server Blade Enclosure Power Request Denied

The company where I work bought a blade server HP C7000 and are unable to connect the bays is showing error Power Request Denied, I must be forgetting to do something, if anyone can help me.

The link has pictures of some errors and the blade:

https://imgur.com/a/3GDHPPW

3 REPLIES 3
Highlighted
HPE Pro

Re: Blade HP C7000 - Server Blade Enclosure Power Request Denied

Hello,

I have checked the uploaded snaps, you installed 4 GB FC module into IO bay 1 and bay 2. Those two bays are designed for ethernet connectivity. Please remove those two module and installed in IO bay 3 and 4. Install ethernet module in IO bay and and 2. Please check and let me know the status.

Thanks


I am an HPE employee

Accept or Kudo

Highlighted
Occasional Contributor

Re: Blade HP C7000 - Server Blade Enclosure Power Request Denied

I changed the position, but it appears the same error, is to two sources only, but it is only a test.

https://imgur.com/a/DhSyl4t

Highlighted
HPE Pro

Re: Blade HP C7000 - Server Blade Enclosure Power Request Denied

Hello,

I see that, you have two power supply. Please install in bay 1 and 4. Remove FC module from Bay 3 and 4. Now power on the server and check. If that does not resolve the issue we need to look at OA show all.

Thanks


I am an HPE employee

Accept or Kudo