cancel
Showing results for 
Search instead for 
Did you mean: 

c-7000 help!

 
Highlighted
New Member

c-7000 help!

My customer upgraded there firmware to 2.60 and upon the reboot they get a degraded state with 3 blades (windows blades) 3 of the other blades are fine there esx blades. The fiber mezz cards aren't seen by the oa. the os does see the cards. The ilo firmware is up to date and I had him reflash both the oa and the ilo but no luck even a reboot fixed nothing. has anyone seen this before?
2 REPLIES 2
Highlighted
Honored Contributor

Re: c-7000 help!

Is the PMC firmware at 3.4?
If not you have to get them upgraded.

any version but 3.4 or 0.5 (Old blades), will give you a warning.

BR
/jag

Accept or Kudo

Highlighted
New Member

Re: c-7000 help!

Thanks I will try that tuesday.