BladeSystem - General
1748121 Members
3344 Online
108758 Solutions
New Discussion юеВ

Re: C-Class Diagnostic Station

 
ISTM
Occasional Contributor

C-Class Diagnostic Station

Is there a diagnostic station available for c-Class blades, like there was for p-Class? I'm guessing not as I can't find anything about it..

3 REPLIES 3
Robert_Jewell
Honored Contributor

Re: C-Class Diagnostic Station

No.  In some ways the OA took over that role. Are you looking for anything specific?

 

 

-Bob

----------------
Was this helpful? Like this post by giving me a thumbs up below!
Casper42
Respected Contributor

Re: C-Class Diagnostic Station

Does not exist. Grab a c3000 from eBay with some pass through modules and that's about as close as you get.
ISTM
Occasional Contributor

Re: C-Class Diagnostic Station

Just thinking for build/test/diagnostic purposes, rather than taking up a slot in enclosures which have quite expensive interconnects!