BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

C3000 Single OA location

 
Highlighted
New Member

C3000 Single OA location

Is there a specific location where the OA modules are placed in the C3000 (Shorty). The installation Guide shows that a single OA goes on the right side, however, the Quickspec states that it goes on the left.
4 REPLIES 4
Highlighted
Honored Contributor

Re: C3000 Single OA location

front left for c 3000 for the active OA,


This is how we thank each other in the forum
hint :)
http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

good basic referance

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01167169/c01167169.pdf
Highlighted
New Member

Re: C3000 Single OA location

The link you sent is kind of what brought on this question, if you look at the quick startup it shows the OA in the right bay.
Highlighted
Frequent Advisor

Re: C3000 Single OA location

There are two slots for OA in the C3000.
Active and passive (redundant)
If you have a configuration with just one OA
it doesnt matter where it sits. Its the active one. I always saw it on the left site...
regards, Frank
Highlighted
New Member

Re: C3000 Single OA location

Makes sense.... Thanks